In: Computers and Technology

Submitted By Jayden6
Words 500
Pages 2

Application - A system, the transmission method of which is supported by telecommunications cabling, such as 100Base-TX Ethernet, or digital voice.

Unshielded Twisted-Pair - A pair of copper wires twisted together with no electromagnetic shielding around them.

Shielded Twisted-Pair - A type of twisted-pair cable in which the pairs are enclosed in an outer braided shield, although individual pairs may also be shielded.

Fiber-Optic Cable - Cable containing one or more optical fibers.

Dark Fiber - An unused fiber, a fiber carrying no light. Common when extra fiber capacity is installed.

Coaxial Cable - Is a type of cable that has an inner conductor surrounded by a tubular insulating layer, surrounded by a tubular conducting shield.

Plenum - The air-handling space between the walls, under structural floors, and above drop ceilings when used to circulate and otherwise handling air in a building.

Riser - A designation for a type of cable between floors Fire-code rating for indoor cable that is certified to pass through the vertical shaft from floor to floor.

Rip Cord - A length of string built into optical fiber cables that is pulled to split the outer jacket of the cable without using a blade.

Core - The central part of a single optical fiber in which the light signal is transmitted.

Attenuation - A general term indicating a decrease in power (loss of signal) from one point to another.

Noise - In a cable or circuit, any extraneous signal (electromagnetic energy) that interferes with the desired signal normally present in or passing through the system.

Headroom - The number of decibels by which a system exceeds the minimum defined requirements.
ANSI - American National Standards Institute is a private non-profit organization that oversees the development of voluntary consensus standards for products,…...

Similar Documents

Uefi Shell Specification

...UEFI Shell Specification September 25, 2008 Revision 2.0 The material contained herein is not a license, either expressly or impliedly, to any intellectual property owned or controlled by any of the authors or developers of this material or to any contribution thereto. The material contained herein is provided on an "AS IS" basis and, to the maximum extent permitted by applicable law, this information is provided AS IS AND WITH ALL FAULTS, and the authors and developers of this material hereby disclaim all other warranties and conditions, either express, implied or statutory, including, but not limited to, any (if any) implied warranties, duties or conditions of merchantability, of fitness for a particular purpose, of accuracy or completeness of responses, of results, of workmanlike effort, of lack of viruses and of lack of negligence, all with regard to this material and any contribution thereto. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." The Unified EFI Forum, Inc. reserves any features or instructions so marked for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. ALSO, THERE IS NO WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION OR NON-INFRINGEMENT WITH REGARD TO THE SPECIFICATION AND ANY CONTRIBUTION THERETO. IN NO EVENT WILL ANY AUTHOR OR DEVELOPER OF......

Words: 35960 - Pages: 144

Ms Word Specifications

...Part 1- Specifications Table (MS Word) Case Study- Director’s Request for PCs Please use the document “Case Study Instructions Director’s Request for PCs” found in the Case Study Instructions conference topic for the list of requirements which should be met by this project. Part 1: For the case study outlines in the Instructions topic, create MS Word tables that identify and contain the hardware and software requirements to meet the director's requirements. The MS Word document in its final form will include 5 MS Word tables. It will include a two-paragraph narrative summary that classifies the user type and identifies the PC category(ies) that will be recommended. Think of the narrative summary as an executive summary where you outline the recommendations without going into a great deal of detail. You will write this executive summary after you have completed the tables. But place the executive summary after your title page, BEFORE the 5 tables. Students are expected to conduct external research to adequately address all aspects of the assignment requirements. Any outside sources should be correctly cited in APA style at the end of the table. Students will need to include specific requirements from the case study to show why each item is being recommended. Each element listed below must be incorporated into the assignment. Omissions will result in loss of points. |Requirement |Points Allocated ......

Words: 952 - Pages: 4

Software Ragistration Specification

...SOFTWARE REQUIREMENTS SPECIFICATION (SRS) FOR Student and Unit Management System (SUMS) – Registration Module Version 1.0 Prepared by: YEUNG Kam Fung (Ivan) Prepared for: Jim Briggs, University of Portsmouth DOCUMENT CHANGE HISTORY |Version Number |Date |Description | |1.1 |8th December 2005 |Jim made some formatting and content | | | |changes | |1.0 |4th December 2005 |Draft | Preface This document contains the Software Requirements Specification (SRS) of an Online Project Marking System for the School of Computing at the University of Portsmouth. The main aim of this project is to add functionality to the existing SUMS system in order to provide an online facility for managing and registering student accounts. This document has been prepared in accordance with the IEEE Std 830-1998, IEEE Recommended Practice for Software Requirements Specifications [IEEE 1998]. Introduction This Software Requirement Specification is written accordance with the IEEE Std 830-1998 model. 1 Purpose This SRS Document contains the complete software requirements for the Online Project Marking System......

Words: 1673 - Pages: 7

Table of Specification

...Pamantasan ng Lungsod ng Marikina Marikina City Edaucation Department 1st Semester, A.Y. 2014 – 2015 Activity No.2 – Midterm ASSESSMENT 2 Leader: BOLANTE, Sarah Jane BSE – 303 Mathematics Rating: Members: CAMPOS, Angela Date: August 15, 2014 JULIAN, Mariel MAGNO, Ralph Rolen TIAMZON, Jona Ailen Topic: Table of Specification, Unit Test as a basis References: Painless Math, Salita C. Benes, 2008 Geometry Textbook for 3rd year, JTW Corporation, 2002 Table of Specification 1 Types of Test to be Prepared Topics | AlternativeResponse | MultipleChoice | MatchingType | ProblemSolving | Total | 1.Quadrilaterals | 3 | 5 | 6 | | 14 | a. Parallel andits properties | 2 | 5 | 1 | 2 | 10 | b Trapezoid andits properties | 1 | 4 | 2 | 2 | 9 | c. Genereral Quadrilateral andits properties | 1 | 3 | - | 2 | 6 | d. Special Quadrilaterals andits properties | 3 | 3 | 1 | 4 | 11 | Total: | 10 | 20 | 10 | 10 | 50 | Table of Specification 2 Tasks to be Measured Types of Test | T | FI | G | E | A | C | Total | Alternative Response | 2 | 7 | - | 1 | - | - | 10 | Multiple Choice | 6 | 6 | - | 1 | 2 | 5 | 20 | Matching Type | 8 | 2 | - | - | - | - | 10 | Problem Solving | - | - | - | - | - | 10 | 10 | Total: | 16 | 15 | 0 | 2 | 2 | 15 | 50 | Legends: T – Terminology E – Example FI – Factual Information A – Analysis G – Generalization ...

Words: 1518 - Pages: 7

Use Case Specification

...Use Case Specification [Title] [Subject/Project] Revision Date: | 00/00/0000 | Revision Num: | 1.0 | File Name: | [ Use Case Specification.doc ] | Num of Pages: | [ 6 ] | Author: | [ [Author] ] | Revision History Date | Revision | Author | Changes | <07/16/2008> | 1.0 | [Author] | <Original document created> | | | | | Document Reviewers / Approvers Name | Position | Reviewer | Reviewer and Approver | Signature of Approver | Sign-off Date | <Joe Smith> | <Business Executive> | | X | | | <James Underhill> | <Analysis Manager> | X | | | | <Mary Jane> | <Development Manager> | X | | | | <Note: * The text in blue and italic is for guidance only and should be deleted before the document is published. * If any section of this document is not required for the project at hand it may be delete it or its content replaced with “N/A”. * Go to “File/Properties” and on the “Summary” tab update the following fields to match your project: * Title – replace the (Title) part of the title with the name of the use case described in this document; * Subject – enter your project’s name here; * Author – enter your names or first initial followed by your last name; * Company – enter your company’s name. * For the changes from the “Summary” tab to take effect select the all the text in the document and press F9. * Repeat this in the header and......

Words: 949 - Pages: 4

C4Me-System Design Specification

...Life Management System for Visually Impaired People Software Design Specification Ms. K.M.S.P. Gunawardhana 2457 Ms. P.S.W.Dissanayake 2449 Ms. F.R.Majeed 2473 Ms. W.R.P.Edirisinghe 2450 Ms. P.J.W.Weerakkody 2494 Mr. T.A.Withanage 2500 Mr. D.G.C.M.Amararathne 2445 Information and Communication Technology Faculty of Applied Sciences Rajarata University of Sri Lanka Table of Contents 1. INTRODUCTION 1 2. ARCHITECTURAL DESIGN .1 2.1 HIGH LEVEL COMPONENT AND THEIR DESIGN 1 2.1.1 Component Design 1 2.1.2 Components 2-3 2.2. ARCHITECTURAL STYLES / PATTERNS 3 2.2.1 Component-Based Architectural Style 3-4 2.2.2 Object-Oriented Architectural Style 4-5 2.3 PHYSICAL ARRANGEMENTS OF DEVICES 5 2.4 DESIGN DECISIONS 6 3. COMPONENT AND DETAIL DESIGN 6 3.1 DESIGN PATTERNS 6-8 3.2 CLASS DIAGRAM 8 3.3 SEQUENCE DIAGRAMS 9 3.3.1 Use case 1: Currency Notes Recognition 9 3.3.2 Use Case 2: Location Recognition 9-10 3.3.3 Use Case 3: Color Recognition 10 3.3.4 Use Case 4: Light Detection 11 3.3.5 Use Case 5: Calculator 11 3.4 ALGORITHM DESIGN 12 3.4.1 Input Entering Algorithm 12 3.4.2 Currency Notes Recognition Algorithm 13 3.4.3 Current Location Recognition Algorithm 13 3.4.4 Destination Recognition Algorithm 14 3.4.5 Color Recognition Algorithm 14 3.4.6 Light Detection Algorithm 15 3.4.6 Calculator......

Words: 2573 - Pages: 11

Specifications for the Director

...Specification for the Director For the case study I have chosen the Dell Precision Tower 5810. The 5810 promotes uninterrupted creativity for design workflows, from concept to presentation. The machine is fast enough to run multiple programs without skipping a beat. It comes with a plethora of productivity software to accomplish any task. Using the Microsoft Office Suite products, you will be able to create documents, spreadsheets, presentations, databases, send and receive email, and effective plan your progress and meetings. Also installed is are products from Adobe and Corel allowing state of the art editing capabilities of photos and videos and online sharing capabilities. Included is a full HD video camera from Lumens to allow high resolution video conferencing. The all-in-one printer from Hewlett Packard that lets you scan, print, and edit photos right from the machine. For the operating system, it comes with Windows 7 and a license for Windows 8.1 Pro. It protects our data by encrypting it with BitLocker & Access one PC from another with Remote Desktop. It allows access to photos & files virtually anywhere with SkyDrive built-in. Windows 8.1 Pro offers enhanced features to help us easily connect to company networks and access one PC from another, encrypt your data, and more. This is the best machine for our needs. Recommended Computer Manufacturer | Type | Model | Dell | Desktop | Precision Tower 5810 | Hardware Devices Input......

Words: 1830 - Pages: 8

Software Requirement Specification

...< Project scenario name > Software Requirements Specification Version < X.0> < team Name > < Scenario Name > Software Requirements Specification Version < X.0> Team Guide:( Faculty Guide’s Name ) Members:(Team members name) College Name: Department: State: / Page 1 < Project scenario name > Software Requirements Specification Version Revision History Date Version 1.0 2.0 Description Synopsis Synopsis Author / Page 2 < Project scenario name > Software Requirements Specification Version X.0 Table of Contents Description 1.0 Introduction 1.1 1.2 1.3 1.4 1.5 1.6 Purpose Scope Definition, Acronyms, and Abbreviations References Technologies to be used Overview Page No. 2.0 Overall Description 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Product Perspective Software Interface Hardware Interface Product Function User Characteristics Constraints Architecture Design Use Case Model Description / Page 3 < Project scenario name > Software Requirements Specification Version X.0 2.9 Class Diagram ........................................................................ Sequence Diagram s ............................................................... 2.10 Database Design .................................................................... 2.11.1 2.11.2 ER Diagram ............................................................... Schema......

Words: 739 - Pages: 3

Job Specification - Hr Advisor

...a customer focused, added value service. To provide informal coaching/training experience to colleagues in relation to HR administrative tasks. To maintain confidentiality in all matters, adhering to Data Protection legislation at all times. Responsibility of identifying any system input or outputs, taking corrective action for any conflicts in the information that you are processed and ensuring this is corrected in consultation with the HR manager. To work across the HR operational teams, in response to peaks and troughs of business activity. To have an understanding of how equality and diversity applies to the responsibilities of the role and to actively promote equality and diversity in all aspects of the role. | Person Specification (HR Advisor) | Criteria | Essential | Desirable | Qualifications, Knowledge and Experience: | CIPD Level 3 Award in Human Resource Essentials or equivalent qualification or experience.Successful experience of working in an HR environment.Numeracy and literacy skills, including percentages and decimals, grammar and spelling.Able to demonstrate working knowledge of Microsoft Word and Excel and the use of standard office equipment.Awareness of relevant employment legislation as it is related to the role. | Working towards CIPD Level 5 award.Successful experience of using online recruitment systems and applicant tracking systems.Experience of managing Administration staff, mentoring and evaluating their progress. | Planning and......

Words: 1042 - Pages: 5

Requirement Specification

...Moji Weather Requirements Specification Authors and Contributions Name | Contribution in % | Ideas, Concepts | Parts of the Specification | | | | | | | | | | | | | | | | | | | | | Prof. Dr. Samuel A. Fricker Mini Project Requirements Engineering Moji Weather Spring 2016 About the Template v1.1E- Spring 2016 The template has been developed for the requirements engineering course offered by Samuel Fricker. The use of the document is continuously reviewed and adapted if necessary. Please direct feedback and recommendations to samuel.a.fricker@gmail.com. The template is useful for projects that aim at conceiving and developing consumer-oriented software products that may be realized by a team of young software engineers. This template is a tool that may be used to define a software that is as simple as possible and generates as much value as possible. Each chapter features instructions on what to document. The author of the requirements specification shall not hesitate to adapt the chapter structure. Also, the texts in the template shall be removed and replaced by the actual requirements. Advise for structuring the contents of a chapter: * Start with a short introduction that describes the role of the chapter and in what relation the chapter is to previous chapters. * Short summary of the chapter contents. * Overview picture or diagram. * Details in tables, texts, and diagrams on a detail level. Good luck and......

Words: 1891 - Pages: 8

Software Requirements Specification

... | | | | | |Software Engineering | |MedPulse | |Software Requirements Specification | | | | | | | | | | ...

Words: 3076 - Pages: 13

Research Project Specification

...Module Specification | Code: | BS21116 | Title: | Research Project | Credits: | 15 | Level: | 5 | Administering School: | East Lancashire Business School | Module Leader(s): | Dr Stephen Kirkup | Assessment Split: | Coursework 100% | Recommended precursors: | SS11112 Research Methods | Typical Delivery mode: | In class delivery | Total contact hours: | Typically 45 | Module Description: | This module will provide students with the opportunity to carry out a small scale research project on an appropriate topic. It will build on and extend the knowledge and skills acquired at Level One in the Research Methods module. | Module TLA Strategy: | Learning and teaching is predominantly targeted on an individual basis through on-going supervision. However, to facilitate reinforcement of research methodologies and principles, there will be some formal sessions based on lectures and seminars. This is augmented with the use of peer group based reflections on the ongoing progress and reflection of the research.Assessment1 updated and modified project proposal (20%) and a 2,000 word report on the task/project (80%) | Programme Outcomes to which the module contributes: | A6 A8 C3 C7 C8 C9 C10 C11 C12 | Syllabus: | The students will undertake a programme of self managed study with guidance from their project supervisor.Students will:- * Modify their research proposal (previously generated) * Consider the ethics involved *......

Words: 468 - Pages: 2

Software Requirement Analysis and Specification

...Abstract:-Software requirement analysis is a method to find out the requirements form the user to develop software. Software requirement analysis and specification also include the types of user requirements and the methods by which developer team can elicit the user requirement and develop suitable software for the user. Introduction:- ➢ Requirement analysis: - Requirements analysis, also called requirements engineering, is the process of determining user expectations for a new or modified product. These features, called requirements, must be quantifiable, relevant and detailed. In software engineering, such requirements are often called functional specifications. Requirements analysis is an important aspect of project management. Requirements analysis involves frequent communication with system users to determine specific feature expectations, resolution of conflict or ambiguity in requirements as demanded by the various users or groups of users, avoidance of feature creep and documentation of all aspects of the project development process from start to finish. Energy should be directed towards ensuring that the final system or product conforms to client needs rather than attempting to mold user expectations to fit the requirements. Requirements analysis is a team effort that demands a combination of hardware, software and human factors engineering expertise as well as skills in dealing with people. ➢ Software requirement analysis: - The success of any new......

Words: 2585 - Pages: 11

Specification Document

...Specification Document WorkFlow Notification / Escalations Configuration Author: | | Version: | 1.0 | Date: | 05/07/2012 | Table of Contents: 1. Introduction 3 1.1. Purpose 3 1.2. Limitation 3 1.3. Business Requirement 3 1.4. Disclaimer 4 1.5. Configuration 5 1.5.1. Server Settings 5 1.5.2. Workflow Settings 6 1.5.3. User Settings 7 1.5.4. Notification settings 8 1.6. References 9 2. Revision History 10 Introduction Purpose This document gives details on how to enable Workflow Notifications / Escalations when the routable object has been routed for approval. Limitation Workflow Notifications can only be configured on each Review and Released status type in all workflows, failing which an escalation mail is sent to approver’s appropriate designated escalation person. The routing manager receives similar email, notifying that the routable object has been escalated to the specified designated escalation person. The designated escalation person may approve or reject the routable object in the place of the original approver. Notification or Escallation occurs only once per status for any sequence of user (User Group) to designated person. References Reminder Period: The reminder period is a period of time defined for each Review and Released status type in all workflows. When the reminder period elapses, if an approver has not approved or rejected a routable object, a reminder email notice......

Words: 480 - Pages: 2

Job Specification

...JOB DESCRIPTION AND JOB SPECIFICATION OF NURSING SUPERINTENDENT Designation: NURSING SUPERINTENDENT Experience: 10-12 Years Industry Type: Medical, Healthcare, Hospitals Role: Nurse Functional Area: Medical. Healthcare, R&D, Pharmaceuticals, Biotechnology Education: UG- B.Sc- Any Specialization, Nursing PG- PG Diploma- Any Specialization, MBA/PGDM- Any Specialization, M.Sc- Any Specialization, Nursing Job Description: JOB PROFILE OF NURSING SUPERINTENDENT 1)To ensure that excellent Nursing is provided to every patient with a smile and positive attitude. 2) To ensure that adequate number of beds are always ready for patients requiring routine and emergency admission. 3) To ensure that every patient is attended by the nurses and R.M.O. immediately on arrival in the ward and prescribed treatment is also started immediately. 4) To maintain cordial and personal relations with all patients and their attendants. 5) To make sure there are no complaints from the patients regarding Nursing, House keeping services and maintenance services. 6) To ensure that patients have paid admission advance, interim bills and there are no outstanding bills from the patients. 7) To ensure that all discharged patients vacate the bed by 12 noon. 8) To ensure all procedures/ investigations/ Doctor’s visit and any other charges are immediately entered in the charge sheet. 9) To ensure proper allocation of job responsibilities for Nursing supervisor/House keeping supervisor / House......

Words: 637 - Pages: 3