Nt1210 Lab 2

In: Computers and Technology

Submitted By Sagenn15
Words 349
Pages 2
Unit 2 Lab

2.1.1 Computer networking is possible by combining all elements together. Media, so that communication is possible between two or more devices. Software, hardware, and user interface to make the communication happen within the network; signal is necessary to transmit information from one device to another. Pattern protocols permit a more standardize way to put everything together to create a networking possibility. Timing so that you can synchronize the frame of reference between all devices in the network. Without all these elements together networking cannot exist.
2.1.2
Network interface is a network-specific software that communicates with the network-specific device driver and the IP layer to provide the IP layer with a consistent interface to all network adapters that might be present. The IP layer selects the appropriate network interface based on destination address of the transmitted packed. Each network interface has a network address. Network interface layer is responsible for adding or removing any link layer protocol header required to deliver a message to its destination.
2.1.3
Internet Gateway Device, Discovery, and Control Client, RIP Listener. Simple TCP/IP services and uPnP user interface.
2.1.4
True democracy. Each PC on the network is equal to the other PC; so they can communicate with each other directly. They don’t have a centralized PC monitoring and controlling the communication network. Every PC shares files and resources with the other PCs on the network. Communication between PCs is a direct link with no central network controller, such as a server. No need for specialized equipment because access to the network is not centrally controlled.
2.1.5
Connect to the internet, connect to the workplace network, set up a home or small business network, and set up an advanced connection. I set up an…...

Similar Documents

Nt1210 Lab 1 Reviews

...NT1210 INTRODUCTION TO COMPUTER DATA LAB 1.1: READING BINARY Exercise: 1.1.1 Create a mapping for decimal number 2931. 10^3 | 10^2 | 10^1 | 10^0 | 1000 | 100 | 10 | 1 | 2 | 9 | 3 | 1 | x | x | x | = 2931 = 2931 x | 2000 + | 900 + | 30 + | 1 | Exercise: 1.1.2 Create a mapping for binary number 110 subscript 2. 2^2 | 2^1 | 2^0 | 4 | 2 | 1 | x | x | x | 1 | 1 | = 6 = 6 0 | 4 + | 2 + | 0 | Exercise: 1.1.3 Create a mapping for binary number 11 subscript 2. 2^1 | 2^0 | 2 | 1 | x | x | 1 | = 3 = 3 1 | 2 + | 1 + | Exercise 1.1.4: Create an expanded mapping for binary number 10010 subscript 2. 2^7 | 2^6 | 2^5 | 2^4 | 2^3 | 2^2 | 2^1 | 2^0 | 128 | 64 | 32 | 16 | 8 | 4 | 2 | 1 | x | x | x | x | x | x | x | x | 0 | 0 | 0 | 1 | 0 | 0 | 1 | = 18 = 18 0 | 0 | 0 | 0 | 16 + | 0 + | 0 + | 2 + | 0 | Exercise 1.1.5: Create an expanded mapping for the binary number 11100010 subscript 2. 2^7 | 2^6 | 2^5 | 2^4 | 2^3 | 2^2 | 2^1 | 2^0 | 128 | 64 | 32 | 16 | 8 | 4 | 2 | 1 | x | x | x | x | x | x | x | x | 1 | 1 | 1 | 0 | 0 | 0 | 1 | = 226 = 226 0 | 128 + | 64 + | 32 + | 0 + | 0 + | 0 + | 2 + | 0 | Exercise 1.1.6: Create a binary conversion for the decimal value 156. 2^7 | 2^6 | 2^5 | 2^4 | 2^3 | 2^2 | 2^1 | 2^0 | 128 | 64 | 32 | 16 | 8 | 4 | 2 | 1 | x | x | x | x | x | x | x | = 10011100 = 10011100 x | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 0 | 128+ | 0+ |......

Words: 800 - Pages: 4

Nt1210 Lab 3

...NT1210 Lab 3.1 3.1.1 You wouldn’t be able to communicate with other devices. You would have to go back to hardline phone and using mail service. No more on the go communications. 3.1.2 The OSI model. It actually shows the process. 3.1.3 Physical, Data, Link, Network, Transport, Session and Presentation. 3.1.4 If its too general the reader wont understand completely. And if its too focused or granular on details it will bore the reader. 3.2.1 Physical – Device Data Link – Physical address Network – Path determination Transport – End to end connections Session – internet Presentation – typing data Application – games, downloads ApplicationPresentationSession | Data | Transport | Segment | Network | Packet | Data Link | Frame | Physical | Bit | 3.2.2 3.2.3 First the receiving computer synchronizes with the digital signal by reading binary numbers. After synchronizing is complete and it gets the whole frame and passes it to the layer above it which is the Data Link layer. Second the Data Link layer will do a Cyclic Redundancy Check (CRC) on the frame. Checking for errors and then strip off any information or header which was put on by the remote systems Data Link layer and pass the rest to the Network layer. Third the Network layer checks the IP address and if it matches the Network layer header is stripped off from the packet and passed to the Transport layer. Fourth the......

Words: 483 - Pages: 2

Nt1210 Lab 3

...Schwarz NT1210 1/14/15 Lab 3 Lab 3.1 The network reference models refer to the TCP and the OSI models of communication between machine and server. The TCP model has a 5 layer process, whereas the OSI model has a 7 layer process. Each is important for sending and receiving data throughout the network. Lab 3.2 The OSI reference model is a networking model that serves as communication between a client and server. This is a 7 layer process. The first layer is the physical layer in which you have the physical connection type. The second layer is the data link which contains the actual data being sent. The third layer is the network layer that grabs the IP address of the receiver. The fourth layer transports the data from one client to another. The fifth layer sets up which software should run the data. The sixth layer determines how the data is presented. The seventh layer opens the application that the data is displayed on. Lab 3.3 The TCP model is exactly the same thing as the OSI model except for the fact that the last 3 layers are shown as 1. The first layer is the physical layer in which you have the physical connection type. The second layer is the data link which contains the actual data being sent. The third layer is the network layer that grabs the IP address of the receiver. The fourth layer transports the data from sender to receiver. The fifth layer sets up which software should run the data, determines how its presented and loads the proper application. Lab......

Words: 343 - Pages: 2

Nt1210 Lab

...to Networking Chapter 1 Lab 1:1:1 Reading Binary 1) The mapping of 2931 should contain the values 2, 9, 3, and 1 in the lower-digits places and 2000, 900, 30, and 1 in the bottom boxes. The place values are the same regardless, so the only change is the addition of 103 as the leftmost digit value. 2 | 9 | 3 | 1 | 2,000 | 900 | 30 | 1 | Exercise 1.1.2 The mapping of 1102 will have 1, 1, and 0 in the lower bit values and 4, 2, and 0 in the bottom bits, for a sum of 6. 1 | 1 | 0 | 4 | 2 | 0 | Exercise1.1.3 The mapping of 112 will have a leading 0 to fit the mapping, which does not affect the results. The lower bits will have leading 0s and then 1 and 1 in the rightmost bits. This results in all 0s at the bottom, with 2 and 1 in the rightmost bits, for a sum of 3. 0 | 0 | 1 | 1 | 0 | 0 | 2 | ......

Words: 349 - Pages: 2

Nt1210 Lab 5.3

...Adrian Fisher NT1210 Tuesday class Professor K Lab 5.3 Exercise 5.3.1: When I entered the ipconfig/release command I couldn’t see my IP address anymore and when I entered ipconfig/renew my IP address came back up. Everything was the same. Exercise 5.3.2: Exercise 5.3.3: Here’s what happened when I entered command PING 192.168.1.1 Here what happened when I entered command WWW.GOOGLE.COM Exercise 5.3.4: Here’s what happened when I entered command PING –A 192.168.1.1 And this is what happened when I ping the local host in a argument. Exercise 5.3.5: Here’s what happened when I entered the command PING –N 6 192.168.1.1. From what I can gather from my research, being able to to send out a certain number of pings that you desire allows you to further analyze the speed of the ping better and get an average round trip time. Exercise 5.3.6: Here’s what happened when I entered command TRACERT 192.168.1.1. It looks like the trace went through 1 system. When I sent the trace to WWW.GOOGLE.COM the trace went through 14 devices. Here’s what happening. Here’s what happened when I traced WWW.NFL.COM. Exercise 5.3.7: There are 2 active connections and 2 protocols being performed when I ran netstat. Here’s what it looked like. When I ran the netstat after I opened up internet explorer this is what popped up....

Words: 256 - Pages: 2

Nt1210 Unit 5 Lab 5.1-2-3-4

...2/24/2015 ITT Technical Institute ­ Print User name: Cordoba, Fabian Cordoba, Fabian Book: Introduction to Networking Lab Manual Page: 96. No part of any book may be reproduced or transmitted by any means without the publisher's prior permission. Use (other than qualified fair use) in violation of the law or Terms of Service is prohibited. Violators will be prosecuted to the full extent of the law. http://itt.coursesmart.com/print?__displaygrbooks=1&xmlid=9781269219389%2F96&__pagestoprint=17 1/17 2/24/2015 ITT Technical Institute ­ Print User name: Cordoba, Fabian Cordoba, Fabian Book: Introduction to Networking Lab Manual Page: 97. No part of any book may be reproduced or transmitted by any means without the publisher's prior permission. Use (other than qualified fair use) in violation of the law or Terms of Service is prohibited. Violators will be prosecuted to the full extent of the law. The 802.1 standards provide LAN/MAN management. The 802.1 standards where created by the close of the 1970’s. IEEE 802.1 handles the architecture, security, management and internetworking of local area networks (LAN), metropolitan area networks (MAN) and wide area area networks (WAN) standardized by IEEE 802. 802.3af is the standard that originally defined PoE functionality. The standard was enhanced in 2009 and was called......

Words: 2482 - Pages: 10

Nt1210 Chapter 2

...Pam Duschek NT1210 8-18-2015 Chapter 2 Review Activities 1) D 2) B 3) B and E 4) C and E 5) A 6) D 7) C 8) C 9) A, C and D 10) C and D 11) A 12) C and D 13) B 14) C 15) A and D 16) D 17) D 18) D 19) A 20) B Define Key Terms Computer Networking: A group of computers sharing data. Computer Network: A LAN (local area network) that connects computers in a house, at school or at work. Application: A software program that runs on any computer / device that enables the user to perform specific tasks. Email: A system for sending and receiving messages. Voice call: A telephone call. Video Frame: A video frame is a rectangle of individual points of light of the video image, as frozen in time. Web Server: Stores information (text, graphics, video, and audio) that the user wants to see and hear, collecting that information into web pages. Web Browser: Software that allows a user to get and display a copy of a web page from a web server. Web Address: Identifies the specific web page that the user wants to display. Web Page: Identified by the name after the / in the URL. Protocol: A set of standards (rules) that defines how software on different devices communicate. HTTP: A standard used by web servers and browsers to define the format of web addresses. Enterprise Network: A network owned and operated by......

Words: 1030 - Pages: 5

Nt1210 Intro to Networking Lab 1.3

...NT1210 Intro to Networking Unit 1 Lab 1.3 Bit Byte Structure exercise 1.3.1 What is the decimal value of Byte 1 by itself? What is the decimal value of Byte 2 by itself? Byte 1 is 6400 and Byte 2 is 233 Exercise 1.3.2 What is the decimal equivalent of the binary sequence in Figure 1-12 (the combined sequence of Byte 1 and Byte 2 as a single decimal value)? How does this compare to the individual values of Byte 1 and Byte 2? The Binary Sequence is 6433 because it is the sum of both values. Exercise 1.3.3 Given a device with a storage capacity of 120 MB, how many bytes can be stored on this device? 1.2x10^8=120,000,000 Bytes Exercise 1.3.4 Given a computer with a disk capacity of 16 GB and a word size of 32 bits, how many words can be stored on the disk? 1.6x10^10=16,000,000,000 Bytes=128,000,000,000 Bits 128,000,000,000/ 32=4,000,000,000 words Exercise 1.3.5 Represent the binary value 110110^2in hexadecimal. Show the steps of conversion that you used. 110110=Two zeros needed to be added to make the value of 8 bits 1101=D 0010=2 Exercise 1.3.6 Represent the hexadecimal value f616 in binary and decimal. Show the steps of conversion that you used. F16 = 11112 and 616 = 01102 when put together the binary value is 111101102 which is equal to 246....

Words: 263 - Pages: 2

Nt1210 Intro to Networking Lab 1.5

...NT1210 Lab 1.5 Exercise 1.5.1 On the desktop of your operating system, create a new folder called Classes. Open the C: drive and locate the path through the subfolders from the root directory C: to get to your Classes folder. This path will differ slightly depending on the operating system. Record the navigation path to get to your new Classes folder. Hint: Most directory structures that include the desktop of a computer involve finding a folder for users and selecting the correct user. C:\Classes Exercise 1.5.2 Open the Classes folder you created and move the myname.txt file to the Networking folder. What has happened to the OS reference to the location of the file myname.txt? What has happened to the physical storage location of myname.txt in memory? C:\Classes\Networking\Myname.txt It changes the file path from C:\Classe\ to C:\Classes\Networking Exercise 1.5.3 Inside the Networking folder, create a new set of folders for your labs and assignments. You should add at least five subfolders. Diagram the hierarchy that now exists from the root Classes folder. C:\Classes\Networking C:\Classes\Networking\Coding C:\Classes\Networking\Homework C:\Classes\Networking\Labs C:\Classes\Networking\Networking C:\Classes\Networking\Vitural Computers exercise 1.5.4 Exercise 1.5.4 Disk fragmentation occurs when files are deleted from memory but that space is not used to store another file. Use the web to identify issues that disk fragmentation can cause for......

Words: 441 - Pages: 2

Nt1210 Intro to Networking Lab 2.3

...NT1210 Lab 2.3 Network types and Topolgies Exercise 2.3.1 Briefly define LAN, MAN, PAN, and WAN. What is the critical distinction for these networks? LAN=Local Area Network. Which is a computer network that links devices within a building or group of adjacent buildings MAN=Short for Metropolitan Area Network, a data network designed for a town or city. In terms of geographic breadth, MANs are larger than local-area networks (LANs), but smaller than wide-area networks (WANs). MANs are usually characterized by very high-speed connections using fiber optical cable or other digital media. WAN=Wide Area Network. A computer network that spans a relatively large geographical area. Typically, a WAN consists of two or more local-area networks (LANs). Computers connected to a wide-area network are often connected through public networks, such as the telephone system. They can also be connected through leased lines or satellites. The largest WAN in existence is the Internet. PAN=PAN is short for Personal Area Network Based on the electric-field transmission medium,  is an IBM technology that allows individuals to exchange data with a simple touch or grasp, such as a handshake. A PAN user is equipped with a receiver and a transmitter, which constantly sends infinitesimal data-carrying currents -- in the 0.1-1 MHz band -- through the body and picks up currents when in very close range with another device or individual carrying a transmitter. Exercise 2.3.2 Briefly......

Words: 1082 - Pages: 5

Nt1210 Intro to Networking Lab 4.1

...NT1210 Lab 4.1 Copper Cabling Exercise 4.1.1 Why are standards so important for NICs, connectors, and media? Use your textbook and Internet research to justify your answer. Simple because Stability, Consistency, Minimization of packet errors. Exercise 4.1.2 The voltage for registering a bit of 1 on Ethernet can be as low as 2.5 volts or even 1 volt. Why is this so low when the capacity for transmitting electricity on the copper wire is so high? Use your textbook and Internet research to support your answer. Because the voltage (or current) used to transmit data needs only be high enough for the receiver to detect it. Making the voltage (much) higher would make the receiver electronics more difficult. Exercise 4.1.3 What are some applications of shielded copper cable? Why is the more expensive shielded cable used in these situations? Use your textbook or Internet research to support your answer. The extra covering in shielded twisted pair wiring protects the transmission line from electromagnetic interference leaking into or out of the cable. STP cabling often is used in Ethernet networks, especially fast data rate Ethernets. Exercise 4.1.4 Complete the entries in Table 4-1. Use your textbook and Internet research to compose your answer. The common connector for interfacing UTP wires to a computer for networking is the Registered Jack 45 (RJ-45) interface. This uses eight copper wires (four twisted pairs) to complete the connec- tion between interfaces. The pinout...

Words: 721 - Pages: 3

Nt1210 Intro to Networking Lab 4.2

...NT1210 Lab 4.2: Fiber-optic Cables Exercise 4.2.1 The light in an SMF cable travels down the center of the fiber parallel to the direction of the fiber in a single path. Can this type of cable be used to transmit and receive bits simultaneously, or does it require one fiber for transmitting and one for receiving? Justify your answer using your textbook and Internet research. No it cannot transmit and simultaneously receive bits with a single cable. A second cable would be needed for sending bits back. In this case you would need two cables one send bits and second cable receiving bits. Exercise 4.2.2 What characteristics of fiber-optic cables allow them to be used over longer distances with less risk than copper cable? The core in single-mode fiber is only approximately 10 times larger than the wavelength of the light it is carrying. This leaves very little room for the light to bounce around. As a result the data carrying light pulses in single-mode fiber are essentially transmitted in a straight line through the core. Electromagnetic immunity including non-conductivity, Security considerations, decreased attenuation and increased transmission distance, Increased bandwidth potential, Small diameter and weight Long term economics Exercise 4.2.3 MMF distances can still far exceed copper cable, but MMF cannot match the distance available from the more expensive SMF. What is the reason for the distance limitation with the use of MMF? Multimode cables are less......

Words: 333 - Pages: 2

Nt1210 Intro to Networking Lab 2.2

...Exdahellilvn NT1210 Lab 2.2 Networking drives Exercise 2.2.1 If an organization has 30 users, each with his or her own PC, what is the comparative cost of buying a $120 printer for each user versus the cost of buying a single, higher-capacity $500 printer that can be used by the entire office? What is the drawback to having only a single printer? What is the cost of having two additional backup printers for the office compared to having individual printers? How many shared printers can be purchased and still be less expensive than individual printers? It would cost $3,900 if each user had their own printer V.S. buying a high capacity single printer for $500. On top of that if ink cartridges cost around $32.00 dollars apiece for each printer cartridge. It would cost a total of $960 for ink cartridges for all 30 printers. If a single printer was connected to a single workstation then it would be only tied to that workstation. No other users would be able to use printer connected to the workstation. The cost of having two backup printers would depend on what type of printers. There are two known types of printers one LaserJet or standard color ink printers. LaserJet printers can run around $500 each V.S. $120-$150 for a standard color printer. Still the cost of having two additional backup printers is less than having each workstation have their own. You can buy up to four printers costing $500 apiece and still come out money ahead. Even if you spent $100 dollars on......

Words: 838 - Pages: 4

Nt1210 Lab 1

...Reginald Patton NT1210 Lab 1 1.1 1.1.1. 103 102 101 100 1000 100 10 1 2 9 3 1 2000 + 900 + 30 + 1 = 2931 1.1.2. 22 21 20 4 2 1 1 1 0 4 + 2 + 0 = 6 1.1.3. 21 20 2 1 1 1 2 + 1 = 3 1.1.4. 24 23 22 21 20 16 8 4 2 1 1 0 0 1 0 16 + 0 + 0 + 2 + 0 = 18 1.1.5. 27 26 25 24 23 22 21 20 128 64 32 16 8 4 2 1 1 1 1 0 0 0 1 0 128 + 64 + 32 + 0 + 0 + 0 + 2 + 0 = 226 1.1.6 156 28 28 28 12 4 0 0 27 26 25 24 23 22 21 20 128 64 32 16 8 4 2 1 1 0 0 1 1 1 0 0 = 100111002 128 + 0 + 0 16 + 8 + 4 + 0 + 0 = 156 1.1.7. 255 127 63 31 15 7 3 1 27 26 25 24 23 22 21 20 128 64 32 16 8 4 2 1 1 1 1 1 1 1 1 1 = 11111111 128 + 64 + 32 + 16 + 8 + 4 + 2 + 1 = 255 1.1.8. 200 72 8 8 8 0 0 0 ...

Words: 1253 - Pages: 6

Nt1210 Lab 4

...Lab 4 NT1210 Cristian Randle Lab 4.1: Copper Cabling 4.1.1: So that NIC’s on different ISP providers can communicate to each other. 4.1.2: The copper wiring is used to power appliances and other devices so it has a high capacity for transmitting electricity. 4.1.3: More expensive shielded cables cause far less interference. Steel reinforced concrete, radio transmitters. 4.1.4: Category | Maximum Speed | Application | 1 | 1 Mbps | Telephone cabling (POTS) | 2 | 4 Mbps | Token Ring | 3 | 10 Mbps | Token Rink | 4 | 16 Mbps | Token Ring Networks | 5 | 100 Mbps | Ethernet, Fast Ethernet, Token Ring | 5e | 1Gbps | Ethernet, Fast Ethernet, Gigabit Ethernet | 6 | 10 Gbps | GigabitEthernet, 10G Ethernet | 6a | 10 Gbps | GigabitEthernet, 10G Ethernet | 4.1.5: 4.1.6: Plastic jacket, metallic shield, dielectric insulator and center core. 4.1.7: Only good under 100 meters 4.1.8: Both straight and crossover cables 4.1.9: S2 to G is too far away to work. Fiber optics would be needed. 4.1.10: Multi-meter: It can be used to locate the failure of electrical system and the defective parts. Tone generator: It acts as a testing device for informational signals that come handy when dealing with telephone systems. Pair Scanner: Identifies connection hosts on a subnet. Time Domain Reflectometer: Locate and identify faults in all types of metallic cables Lab 4.1 review: 1. Less confusion, need only one type of cable easier to install, less time......

Words: 739 - Pages: 3